
Navix
2012-10
Page 6
Electric wheelchair, Class
Masses of parts that can be dismantled or
removed.
0.95 kg;
1.90 kg;
Seat frame: 17.05 kg; Lower frame + armrest + joystick:
31.65 kg; Batteries: 27.15 kg
Static stability downhill 15°
Static stability uphill 15°
Static stability sideways 15°
Maximum safe slope 9°
Obstacle climbing 50 mm
Ground clearance 60 mm
Seat plane angle 5° 10°
Effective seat depth 380 mm 500 mm
Thickness seat cushion 40 mm
Seat surface height at front edge 400 mm 500 mm
Backrest angle 0° 40°
Backrest height 580 mm
Distance between footrest and seat 330 mm 400 mm
Angle footrest 12°
Distance between armrest and seat 260 mm 350 mm
Front location of armrest structure 410 mm
Driving motors SRG05 / 2 x 220W
Batteries 2 x 12V
/ 38 Ah / 20 hr
Battery charger Exendis Impulse S (6A); IP21; Insulation class II
Thermal fuse 30 AMP
Control unit Shark or DX2 / Electromagnetic braking system
Degree of protection IPX4
Minimum turning diameter 1250 mm
Reversing width 1250 mm
Diameter Rear wheels (number) 317.5 x 57.15 mm air (2)
Tyre pressure, rear wheels Max 2.8 bar
Diameter front wheels (number) 200 x 50 mm (2)
Tyre pressure, front wheels Not applicable
Noise level < 65 dB (A)
Storage and use temperature +5 °C to +41 °C
Operating temperature of the electronics -10°C to + 40°C
Storage and use humidity 30% 70%
e right to introduce technical changes. Measurement tolerance
* The theoretical driving distance will be reduced if the wheelchair is used frequently on slopes, rough
ground or to climb curbs.
Table 2: Technical specifications rear wheel drive
Kommentare zu diesen Handbüchern